About Corbin Commercial Bullet Swaging Equipment What Tools Do You Need? The first thing to do is determine the limits for the bullets you plan to make. What is the largest caliber, the longest bullet length, the hardest core material, and the thick...
Get Started Swaging With Corbin The tools you need depend on the bullet you want to make: A lead bullet with a step or shoulder between nose and shank (like a Keith or SWC or Wadcutter) can be made in a single die, called the "LSWC-...
About Corbin CHP-B2 1.25x12 to 1.50x12 Adapter CHP-B2 Adapter Bushing This adapter bushing adapter bushing converts the head of the Mega-Mite CSP-2 press, or the Hydro-Press , to accept large diameter reloading dies from RCBS (and other manufactur...
About Corbin CHP-T Catcher Tray The CHP-T Catcher Tray is used with the Corbin Hydro-Press (CHP-1) or the Corbin Mega Mite press (CSP-2) to catch lead extrusions or spent primers, and prevent them from falling into the ram slot, or ...
About Corbin Bullet Jacket Making Kit The Corbin JMK-2-H Jacket Making Kit, in conjunction with the Corbin Hydro-Press and Corbin CSU-1 Strip Uncoiler, makes a high precision strip jacket drawing system for a fraction of the usual cost fo...
About Corbin Jacketed SWC 2-Die Set The JSWC-2 consists of two dies, the core swage (CSW-1) and the core seater (CS-1). These can be type -S or type -H, for either the S-press (CSP-1) or the Mega Mite press (CSP-2) or Hydro Press (CHP-1...
About Corbin Bullet Jacket Making Kit The Corbin JMK-1-H Jacket Making Kit, for use with the Corbin CSP-2, CHP-1, or CSP-2H presses, makes precision bullet jackets in any caliber, some of which can then be redrawn to other calibers and tr...